|
Q1:
We are a manufacturer of wireless handheld and fixed equipment. What kind of rubber antenna would Procell recommend us?
A: We are able to offer to you our dipole or embedded antenna for your wireless equipment. If your requirement is 0-5 dBi (or under 0) Gain in 900, 1800 MHz, 2.4, 5.8 GHz, we suggest that you refer to our RA, RB, RC, SB or even RS Series or embedded antennas. If you need to conceal antenna inside your equipment, please contact our business partner or us for OEM/ODM antenna.
Q2:
We are a distributor of wireless equipment and our customers use PCMCIA cards in their notebooks and handheld equipment, both indoors and outdoors. They are concerned about the signal strength of the transmission and would like to have a longer transmission range. What can Procell offer us?
A:
If an external antenna connector is available, (Like MMCX, MC card or SMA, --) in PCMCIA card, we would like to suggest the using of our RS or PA series (PA-S02, PA-S01) or flat board (OA-004) antenna which are designed for portability. It can be readily carried and has an external cable of your required length. Besides the higher gain for increasing the radicalization incidence to your customer¡¦s specifications, like the RS series, it can also achieve up to 3dBi, and 7dBi for the PA-S02 based on 2.4GHz frequency.
Q3: As it is not advisable to have antenna located at the back of PC or fixed wireless equipment due to its negative effect on radicalization incidence, what do you recommend?
A: With an antenna connector outside, you can make use of our external antennas to position your transmitting and receiving base stations at an outdoor location for maximum signal strength. Our RS or OA-004 or PA or PA series antennas will be the best choice. You can specify or design your antenna connector so that it will work alongside with your PC or fixed wireless equipment. We will be pleased to render you assistance in this respect, and this will be the perfect solution for the settling of your antenna, and increasing gain.
Q4:
We are building an extensive wireless environment within our office which covers quite a big area. The existing antenna that is in used is a rubber antenna (around 2-3 dBi). What can Procell offer us to improve the efficiency of the system.
A: We manufacture hi-gain antenna that can be used indoors. If you are considering using directional antenna, you can achieve a longer distance in radicalization incidence though with a limited angle. Our Panel antenna (eg: PA Series antenna) will be perfect for this application. You can have a choice of different antennas based upon your required level of gain. However, if the angle of transmission is important to you, our suggestion is that you use our OMNI antenna (eg: OA Series). That is no direction (smaller) in horizontal (but vertical is getting to smaller if the Gain is getting to higher.), and you still can choose the Gain for your demand in our products. Also you can consider Ceiling antenna to settle the antenna in Ceiling to get the best angle that you want.
Q5:
We are using outdoor wireless equipment and we need to increase the transmission range. We need to transfer data in point to point or multi point to point. What kind of antenna can you offer us.
A: We manufacture OMNI, Panel, Sector and Yagi antennas that are perfect for your application. Please refer to information available in our website. Most of our antennas are hi gain although you can select their features based upon your requirements. For point to point usage, consider using Yagi or Panel antennas. If your require point to multi point, you can consider using our ONMI to Yagi, or Panel antenna.
Q6:
We could not find the type of antenna we need from your website. What do you suggest?
A: We will be pleased to be your OEM/ODM supplier. We have the technological know how to manufacture antennas according the specifications of your wireless equipment, be it rubber antennas, panel antennas, OMNI antennas, PC board flat antennas or any other types of antennas.
|
